Professional Factory EF-RS180Z-T Electric Heat Shrink Tubing Machine for Terminal Wires

EF-RS180Z-T Electric air heater is suitable for heating long wire harnesses, terminal wire harnesses and other heat shrinkable sleeves, working continuously for 24 hours, and the heating time can be set freely. A variety of control methods can freely adjust the heating time and stop time according to actual need. It can start heating by the manual trigger or run-in automatic cycle heating start-stop mode. Thermal insulation design of the heating area The double design of the shell in the heating area makes the internal and external temperatures isolated, and the shell surface temperature is low.

Category	Description	Parameter
package	External dimensions of export wooden cases	830mm×390mm×480mm
	net weight	16.5KG
	Gross weight	30KG
size	overall machine size	See picture
	heating length	<130mm
	heating diameter	<25mm
Heating pipe	heating pipe name	Infrared radiation tube
Heating pipe	heating pipe power	500W*4=2000W
Power Supply	power demand	AC 220V ±10% 50HZ
Power Supply	whole machine power	2.3KW
safe	security level	PE

AC power source: AC-220V ±10% Maximum output power: 2.3KW Measure input impedance: > 4MΩ Relative humidity: ≤ 85 %

Warning! Only professional technicians are allowed to install and debug the equipment! Warning! Even if the equipment stops running, the temperature in the heating zone may still be very high! Warning! When the equipment is working properly, there will be high temperatures on the surface of the box body. Please do not contact directly with the skin to avoid scalding. Warning! The PE line of this equipment must relate to the PE line in the factory.Heating mode: The approximate semi-enveloping ring infrared radiation heating is adopted to increase the heating uniformity. Heating control modes: 1. Step on the trigger to heat. 2. Automatic cycle heating start-stop mode operation.

The equipment consists of two parts, which can be disassembled or assembled into a whole. Heating system: consisting of electrical components of heat source and mechanical components of fixed heat source. Control system: control equipment operation mode and adjust heating time and operation interval.

FAULT	REASON	PROCESSING METHOD
The cooling fan does not work	The device is not powered	Connection power
	“Power switch” OFF	Power ON
	Damage of blower	Replacement blower
Heater not working	“Power switch” OFF	Power ON
	The heating pipe is damaged	Replace the heating pipe
	Heater circuit problem	Check the line
	Footswitch damaged	Replace the foot switch
	Controller damaged	Replace the controller

Serial No	Maintenance content	Inspection cycle
1	Check the heater cooling fan for operation	Every day
2	Check whether the current is between 8.5A and 9.5A when the equipment is running, or whether all heating tubes are heated	100 hours of operation
3	Press the leakage protector test button to check whether the circuit breaker operates normally	100 hours of operation